Zetacartridge No 4 is a high performance, Fast curing two-part resin anchor system based on a modified Epoxy acrylate.
Pre-packed in a 10:1 ratio cartridge for ease of use.
Epoxy Acrylate Styrene Free with ETA and CE Approval.
- Suitable for use in concrete, brickwork and stone
- Suitable for fixing wall ties, starter bars, studs & bolts
- Suitable for close edge fixings
- Chemically resistant, waterproof & vibration proof
- Crack and gap filling repairs. Damp & wet holes.
How to use
Unscrew the cap from the cartridge and screw on the static mixer nozzle.
Fit the cartridge into the applicator gun and gradually apply pressure to the trigger until the material exudes from the end of the nozzle.
You should always waste the first 10cm or so of resin until you get an even colour.
Insert the nozzle into the hole & gun the material out, removing the nozzle slowly as the hole fills up.
Once sufficient resin is in the hole, release the pressure from the gun and place the stud to be fixed into the hole with a twisting action to ensure full contact between hole, resin & stud.
Allow resin to cure fully before loading. Please see label on cartridge for full installation instructions.
